About daniel.dib

daniel.dib · 12-16-2015

Hi, I have a setup today where we are testing reachability of a service through the IP SLA TCP connect probe. This is done towards an IP address, straight forward so far. Unfortunately they ISP will not be able to provide a static IP in the future w...

daniel.dib · 08-22-2014

Hi,I have a customer that needs to tunnel serial data from remote sites to a central site. This serial data is HDLC encapsulated and the remote site has a Cisco 1921 router with HWIC4A/S.The central router is a Cisco 2951, also with HWIC4A/S.This cus...

daniel.dib · 03-28-2014

Hi,I'm having issues getting a L2L tunnel up between a Cisco ASA and a Fortinet. This is the first tunnel being setup with IKEv2. The ASA is complaining that it can't find a matching policy.The Fortinet device is configured by other party and I have ...

daniel.dib · 03-04-2014

Hi,I'm finding it very difficult to find any documentation on what QoS features are supported on Cisco 1921 router with EHWIC-D-8ESG module.CISCO1921/K9Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2...

daniel.dib · 02-15-2014

Hi,Cisco recently released Cisco XRv 5.1.1 which is IOS XR running in a VM. I thought it would be nice track features working not working and if Cisco could comment on the roadmap.Working:ISISBGPLDPNot working:EoMPLSVPLSControl plane is up for EoMPLS...

daniel.dib · 04-02-2022

Yes, it works. I have this setup for a couple of customers. Seems that NGINX or what they are using for the web requests will accept any name.

daniel.dib · 03-18-2022

Hi Markus, The way I usually approach this is to create CNAME in customer's DNS that points to Cisco's A record. So something like vmanage.example.com pointing to vmanage-xxx.sdwan.cisco.com. Then generate a CSR under Administration -> Settings -> We...

daniel.dib · 03-28-2020

Currently trackers aren't supported on cEdge but it's coming. I don't know of a workaround so far. Might be able to find one when there is support to have device managed by vManage and add CLI templates, which isn't supported today.

daniel.dib · 03-28-2020

Hopefully it will be included in VIRL2 when released but haven't seen any definite information on it. It's also possible to use various virtual platforms to setup your own lab.

daniel.dib · 09-07-2019

Did you install the root certificate?

Member Since	‎01-12-2009 07:13 AM
Date Last Visited	‎04-19-2024 12:05 AM
Posts	466
Total Helpful Votes Received	924

User Statistics

User Activity

IP SLA TCP connect towards FQDN - EEM or TCL required?

Are L2TPv3 endpoints not supported to source from VRFs?

Can't get L2L VPN up between ASA and Fortinet (IKEv2)

QoS supported on EHWIC-D-8ESG?

XRv 5.1.1 - Working/non working features and roadmap

Re: vManage web certificate (Cloud version)

Re: vManage web certificate (Cloud version)

Re: Ask Me Anything- Cisco SD-WAN Policies: Leveraging the Full Power of Cisco SD-WAN

Re: Ask Me Anything- Cisco SD-WAN Policies: Leveraging the Full Power of Cisco SD-WAN

Re: certificate issue with controllers after generate csr