Hi Guys   I'm using a IR829GW as a terminal server, this has two Async ports, one of them using rolled cable (rj45-rj45) to connect to the console port in 1841 router. When I telnet y notice the terminal server is establishing the reverse telnet sess...

Hi Guys I have a situation. The scenario (see the attached diagram) has to PE01 (IOS) connecting via a port-channel to P01 (IOS-XR), turn P01 connect to PE02 (IOS-XR). So we've configured a pseudowire between PE01 and PE02, this works fine! then we'v...

Hi GuysI would appreciate a lot your experiences and best practices about operating and monitoring dual stack networks in Service Provider environments. Currently we're working in a 6VPE model for Internet customers in order to provide dual stack ser...

Hello GuysI wanna to implement PE redundancy for CE devices on the access layer. We have l3vpn customers, VRFs are terminated on PE routers, so all the traffic going to CE devices is layer 2, except for some CE devices that are working in layer 3. So...