About twin-turbo

twin-turbo · 09-07-2012

I have a vlan interface who's clients should only be able to access our internal intranet server and the internal side of the proxy server on another vlan.Clients are on Vlan460 ( 10.66.0.x )Servers are on Vlan200 ( 10.32.0.x )Intranet server is 10.3...

twin-turbo · 08-17-2012

We have a 2 node CCM 7.1 and Unity Conection 7.1.Last week we were doing some maintenance and I noiced that when the Publisher was off line that calls to the main number were not getting through to Unity. Calls to other DDI's were working fine via th...

twin-turbo · 02-16-2012

Dear All,Please see the attached diagram fron CNA. Our sister site had a new building and the network it was supposed to resemble the network on this site with link redundancy as far as the edge switches.After 6 months asking for the password to the ...

twin-turbo · 09-23-2011

Dear All,1841 - IPBASE 12.4.7dWe provide internet access for a number of clients sitting on our WAN, at present they have un-restricted access to the full bandwidth of our 1Gb internet pipe. As they are only paying for a proportion of that we want to...

twin-turbo · 09-10-2010

WS-C3560.(C3560-IPBASEK9-M), Version 12.2(44)SE2I have this 3560 that has been causing problems, I have just removed the config and restarted from scratch.I have set 2 vlans up with IP's.All fine so far..half the ports are in 1 vlan/ half in the othe...

twin-turbo · 04-15-2013

7.1.5 UK.The week before BST our phones changed time but 7940's 7911's were affected differently. I found a timezone for "Legacy phones" which fixed the issue.After BST all phones were an hour behind, I installed the DST patch and restarted the serve...

twin-turbo · 02-27-2013

Just to follow up on this a year later.......The provider was told that the layout was substandard and needed changing. They said it was fine.I e-mailed the diagram and asked them to describe the way in which it was1) Highly Resiliant2) Designed for...

twin-turbo · 02-06-2013

Just had the above issue.I was using dummy DNS values just to get running, after putting in a real server that had an entry for unity it worked.THANKSRob

twin-turbo · 09-13-2012

Thanks Jennifer, With your help I determined access-list 101 permit tcp 10.66.0.0 0.0.0.255 host 10.32.0.136 eq 8080access-list 101 permit tcp 10.66.0.0 0.0.0.255 host 10.32.0.160 eq wwwaccess-list 101 permit udp any any eq domainaccess-list 101 perm...

twin-turbo · 08-23-2012

Well it did not work at first, took a minuet or two to hop over . I am not sure how long it should take ?It may have been ok last week when I changed the subscriber server entry in Unity from the old IP to the new one (which should have been done by...

Member Since	‎08-26-2010 06:40 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	25
Total Helpful Votes Received	5

User Statistics

User Activity

Realy totaly lost with a simple ACL...

Unity Auto Attendand unavailable whilst CCM7.x Publisher is down.

Independant opinions needed on our network.

Applying rate-limit to a bridge on 1841

Random config "switchport trunk pruning vlan" appearing.

DST summer 2013

Independant opinions needed on our network.

Unity Connection 7.1.5 restore failing

Realy totaly lost with a simple ACL...

Unity Auto Attendand unavailable whilst CCM7.x Publisher is down