About jordipuig

jordipuig · 10-24-2013

Hello, I have an ASA 5510 with AnyConnect and AnyConnect Mobile licenses.Clients with a laptop can connect through AnyConnect without troubles and can use all vpn resources.Clients with Android with AnyConnect client, can connect to the VPN, but they...

jordipuig · 09-03-2013

Hi, I have a communication problem between 2 servers that are behind a firewall.I'm trying to connect from one to the other through TCP 3306 port and, after a lot of system configuration checks and tests, I found the following records in ASA debug co...

jordipuig · 08-07-2013

Hi all, I'm very new in AnyConnect and I'm doing something wrong.If I navigate to https://myIP I can successfully log into the portal, download and install the AnyConnect Client and also CONNECT to the VPN.But if I disconnect to the VPN, and try to l...

jordipuig · 04-12-2013

Hello,I have an ASA 5505 working between a router and a LAN. The router have all ports redirected to the ASA.What I need now is to be able to access to the port 80 of the router from the WAN.I could redirect all ports to the ASA except the 80, but I ...

jordipuig · 10-25-2013

Finally I get it working...I realised that in a rooted tablet, the AnyConnect client for rooted devices worked, so (and as you suggested in your first reply) it was related to the AnyConnect version.I was using "Samsung AnyConnect", and now I tried t...

jordipuig · 10-24-2013

Hi Marius, I'm using Android 4.1.2, and tried it with 2 devices, a Samsung Galaxy S3 and a Samsung Galaxy Note 3.I downloaded the latest version of Samsung AnyConnect from the Play Store as the guide you told me says.And no, I don't have any problem ...

jordipuig · 09-03-2013

Hi Jouni, Thanks, you guide me through the right way.I added the arp entries manually on both servers, and nothing. But I realised that broadcast address wasn't properly configurated in the soruce server. After fixing that, the both servers can commu...

jordipuig · 08-08-2013

Well I think I found the trouble.The point is that I'm not using the default port for HTTPS and DTLS.When I connected to the VPN through the portal, the Connected to box showed my outside IP, so when I disconnect, I try to connect to the same IP and ...

jordipuig · 08-08-2013

Hi Christopher, that was the first I have to do in order to be able to connect when I connect to the VPN (through the web) for the first time. So I can confirm it is unchecked.Thanks for the advice

Member Since	‎04-12-2013 01:58 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	11

User Statistics

User Activity

Can't open http

Deny TCP (no connection) from inside to inside

AnyConnect connection attempt has failed

Accessing router config

Can't open http

Can't open http

Deny TCP (no connection) from inside to inside

AnyConnect connection attempt has failed

AnyConnect connection attempt has failed