About kbrinker

kbrinker · 10-16-2012

I have an UCS C200-M1 server that I cannot login to it's CIMC anymore. I was able to at one time. When I telnet to it it asks for login name and password. I have tried what was good before and it didn't work. I went into the CIMC during bootup an...

kbrinker · 10-15-2012

I have a C200-M1 UCS server running CIMC v1.1 and BIOS of C200M1.1.0.4.0. As I am unfamiliar with the UCS servers, I am looking for a suggested upgrade path to the latest versions. I know I need to do a manual upgrade at this point. Do I need to m...

Import User error on Unity Connection · 03-14-2012

I am having a problem Importing a user into Unity Connection on a CUCMBE 6.1(3). After creating a DN and User, I went back to the Directory Number and had mistakenly added the user to Unity Connection using the Related Link: Create Cisco Unity Voice ...

kbrinker · 02-10-2012

I have started discussions with a client about migrating them from CM/Unity 4.X to CUCM/Unity Connection 8.X. My plan is not to upgrade them from 4.X to 7.X to 8.X, but rather to migrate them from 4.X to 8.X by building a parallel VMware server alon...

kbrinker · 01-11-2012

I am recommending a UCCX to a client. They want the UCCX to perform a particular function that their current CC does for them. When a call has been in a queue for an agent for longer than 2 minutes, they want the call forwarded to an outside line at...

kbrinker · 10-16-2012

Padma,I have resolved my problem. There was a duplicate IP address on my network. Now I find that the CIMC only reponds to 192.168.1.10, even if 192.168.1.9 was configured on it. I now see my CIMC version is 1.2(1b) and BIOS is 1.0.4.0. I will...

kbrinker · 10-16-2012

I have found my problem. The IP address of my CIMC 192.168.1.9 was assigned to a server on my corp network. When I disconnect from the corp network, 192.168.1.9 doesn't respond to ping. With only the UCS MGT port conencted to my lab switch, 192.1...

kbrinker · 10-15-2012

Padma,Thanks for the input, I will give it a try. At this time I cannot access the CIMC on this server. I have the MGT port connected to my switch and CIMC has an IP address configured. I also have my Gi1 port connected. I can access the ESXi an...

kbrinker · 08-01-2012

I ran into the same issue that Davies did. I also rebuilt my server to no avail. I followed Walters advice about logging in as the user defined as the administrator and it worked! Seems like a simple resolution in retrospect.

Import User error on Unity Connection · 03-19-2012

TAC issued the following commands on the Unity servers CLI:run cuc dbquery unitydirdb select objectid from tbl_User WHERE DisplayName='8603'No records foundutils cuc users bulk_clean_orphans mapentries Executed command unsuccessfullyNo...

Member Since	‎02-09-2005 05:41 AM
Date Last Visited	‎10-09-2017 02:07 PM
Posts	24

User Statistics

User Activity

Can't Login to CIMC

Suggestion for C200-M1 BIOS/CIMC upgrade path

Import User error on Unity Connection

Migration from CM 4.X to CUCM 8.X

Can UCCX forward a call to an outside phone after a wait time is exceeded?

Suggestion for C200-M1 BIOS/CIMC upgrade path

Can't Login to CIMC

Suggestion for C200-M1 BIOS/CIMC upgrade path

Ccx 8.5 password change after install

Import User error on Unity Connection