Ciao,P1R1 is running eBGPWAN router speaks with eBGP with P1R1 and redistribute it to OSPF process (E1 type); COREx are speaking with WAN via OSPF area 1 (ptp link) and speaking between them via OSPF area 0 (ptp link).What happened is that CORE2 lear...

Ciao,in order to create a VSS cluster is it mandatory to put the C6880-X-16P10G line card in performance mode ?BR,Luciano

Ciao, we are just facing a strange behavior on a FO SM link (span is about 2km).The link connects one 4506 with X2-10GB-LR to a Nexus 3548 with a 10Gbase-LR: the link is up & running.The strange behavior is the TX power registered by the X2:KL-MENARA...

Gentlemen,I try to figure out how to configure OTV with ASR "on a stick" with only one OTV edge device per site; the WAN link is a routed port on the cores of each DC.Up to know I understand the following1 - One link to core\aggregation with L2 Vlan2...