Hi all,i have a question regarding functionality of "timeout activeconns" command on ACE module. Deployment:we have serverfarm named WSA containing following rservers - HTTP_PROXY_1, HTTP_PROXY_2, HTTP_PROXY_101, HTTP_PROXY_102HTTP_PROXY_1, HTTP_PROX...
Hi Francesco,I have similar problem - I can not delete couple of serverfarms. Serverfarms are not used and there are no rservers in the serverfarms. Interesting is, that I can delete some other serverfarms. Thanks in advance. Software loader: Ver...
Hi Luc,that link is available only for partners :-(The problem of PMTUD is that it relies on ICMP (Type 3, Code 4), which is denied on majority of FWs :-(. And security guys will not allow you to permit this type of traffic because of many attacks ba...
Hi Peter,you can simply verify whether this is a really MTU issue. Just add "ip tcp adjust-mss 1200" command to any L3 non MPLS interface, f.e. PE-CE interface.MSS (maximum segment size) is negotiated during tcp establishment (3-way handshake). By us...
Hi Kent,could you pls provide output of following commands from PE2:7609#sh ip ospf 116 database summary 192.168.102.07609#sh ip ospf 116 database router 192.168.102.07609#sh ip route vrf RED 192.168.102.07609#sh ip bgp vpnv4 vrf RED 192.168.102.0Dow...
Hi KS,not sure if I understood correctly, but following seems not to be true:Also, the following should be true in order to enable this command:- no nat-control should be enabled- nat/global should not be configured- static - even identity should not...
