I am using this Query. it is default cisco template. SET ARITHABORT OFF SET ANSI_WARNINGS OFF SET NOCOUNT ONSELECT Media = Media_Routing_Domain.EnterpriseName,MRDomainID = Media_Routing_Domain.MRDomainID,Attribute1=A1.EnterpriseName,Attribute2=A2.En...
Hello All, I have almost 20 servers with UCOS. which inclued CUCM, CUC, IM & P. I just want to know if there is a way to excute a script to capture the output of set of commands. For Ex: 1. Show status2. Show ntp status.3. Utils service list.
Hello All,
We have recently deployed CUAC 11.0. we have issue with queue device group configuration.
Before 11.0 CT gateway Devices we used to give the range for 8001 to 8009
Service Devices is for holding range of 8010 to 8019.
But the functi...
Hello Guys, I want to move my cisco ICM is managed by Service provider from his network. now i want to build my own ICM with in the network. how to perform this activity with minimum loss of data. Note:- I am going to use new VM and IP Address and Ho...
I have the same issue, but unable to fix. ESVDLRT03#Nov 21 17:53:51: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:INVITE sip:918221791@192.168.1.100:5060;received=80.28.123.9:5060 SIP/2.0Via: SIP/2.0/UDP 109.167.99.99;rport;branch=z9hG4bKeN30g...
