Hi,I'm struggling to set up an IKEv1 IPsec connection from a 3G router to an ASA 5506. The same VPN with a 5505 works perfectly.Among other things, sh ver shows me this message:  The Running Activation Key feature: 2 security contexts exceed the limi...

Hi,   I'm setting up an ASA 5506, and I'd like to use its ports like the ASA5505, so I use BVI1 interface. I've set up a VPN from my site to the site where the ASA is located. It works, I can access remote devices, but when I try to access the firewa...

Hi,   I have a 5505 with ios 9.1(6), that's usually used for internet, i.e. clients on inside can surf internet according to ACLs. All is working.   Then I have a Tomcat server listening on port 8080 that needs to be exposed on internet. I'd need to ...

Hi,I've a network that for its lan part is made of a single C class.Servers are in one place, a client (10.2.0.201) is in a different place, connected to the central site via two ubiquity nanobridge set in bridge mode.There are users that connects vi...

Hi all, I've two internet lines, each one with a static public IP, sat IP1 and IP2, supplied by different ISPs. Each line is the outside of an ASA firewall. The inside of each firewall is on the same lan segment, say it's 10.0.0.2 and 10.0.0.3 I hav...