I know this is going to sound rediculous but I need a second opinion. I have a Cat6506. There were 2 Sup 720 in it for redundancy. They told me they had problems with this thing in the past needing to go out and reboot the machine. I need to go o...
The mac-address for the BVI on the wireless bridge is not attaching itself to the interface on the 6513 switch. We recently changed the vlans at the campus. At first I thought I had a vtp pruning problem but ended up being a spanning-tree problem. ...
We are having to change our IP structure and I came across a problem with the vtp pruning. I have been configuring our WAP 1231 with new vlans for the ssid. I create new sub interfaces for the radio 0 and fa0. This is the first time configuring 2 a...
I have a lot of cisco 1231G APs in our school district. Recently they were having issues with the signals in some areas. Now when we try to test to see if there is a signal it keeps fading in and out. Sometimes there is no signal there. Our APs a...
Hi everybody. Have a question that I need confirmation on. I have several schools that use programs for viewing what the students are doing on their computers. The teacher can be at their desk and see what is on the students computer screen. This...
Thank you both for your replies. I did check the bootvar and this is what I got:SSHS-IDF13-6506-195#sho bootvarBOOT variable =CONFIG_FILE variable does not existBOOTLDR variable =Configuration register is 0x2102The nvlog showed that I restarted it, ...
I had to replace both WAP to recreate the bridge. Whatever was going on with the other 2 I don't know. I send ping and telnet traffic on my management vlan.I am trying to send traffic on 3 other vlans but no success. A computer connected to one of...
I finally found another WAP that was removed from some where else. I reconfigured it and installed it. Now I can ping and telnet to the other side of the bridge. So I found a second one hoping that could solve the problem on the other side as well...
