I am using a dynamic ip dsl internet connection to create a L2l connection with a vpn concentrator at the other end. the problem is we always have to update the peer's dynamic ip address in the concentrator. Is there a way to avoid this repetitive ta...
I was facing a similar problem. I was only using the man0/0 interface to give the CX module network connectivity, but as soon as I enabled another firewall interface on the same subnet, I had connectivity problems with this interface sharing the same...
Here's how I did it:Step 1) Link ISE to ADStep 2) Import AD groups (at least the ones used for admin access)Step 3) Enable AD external identity source for admin authenticationStep 4) Create an external admin group on ISE admin groups and link it to t...
Have you checked time settings on the DMM and players?I had this same issue and found out my DMM was 7 hours ahead of the players, and after synchronizing clocks on DMM and DMP's to a local NTP server, they were able to register successfully.Also, do...
Hi,Are these supported and unsupported features documented somewhere in CCO? I'm concerned about the inability to replicate Dynamically-mapped users. I went through the whole ACS SE 4.1 User Guide and didn't find an exact answer.Thanks for your help!
We managed to bring the Catalyst Express 500 back to life using the following procedure:1) Installed Cisco Network Assistant (free tool available at CCO)2) Restarted the switch with the setup button pressed until the 3 upper leds were solid amber, th...
