About ahmede_2

ahmede_2 · 10-16-2015

Thank you. So if I want to stop this message from occurring, what should I do?

ahmede_2 · 10-16-2015

Tunnel interfaces seems to be a good solution, not sure why you are trying to use different VRF to b...

ahmede_2 · 10-16-2015

Any one knows what this message means? will it have any impact on the router operation Police confor...

ahmede_2 · 10-16-2015

Hi there, I know that the Nexus 5596UP with L3 card doesn't support WCCP (even with Version 7). will...

ahmede_2 · 10-05-2015

Can you please post the output of these two commands show moduleshow license usage

ahmede_2 · 10-05-2015

How about HTTP, does it work? You might have a problem with your MTU size.The simple way to check is...

ahmede_2 · 10-02-2015

Show module Mod Ports Module-Type Model Status--- ----- ----------------------------------- --------...

ahmede_2 · 10-02-2015

XXXXXXXXXX# sh verCisco Nexus Operating System (NX-OS) SoftwareTAC support: http://www.cisco.com/tac...

ahmede_2 · 10-02-2015

I'm trying to upgrade Nexus 5596UP to version 7 I used the commandinstall all kickstart bootflash:n5...

ahmede_2 · 09-28-2015

Thanks for your reply. That was the first thing I checked. Cisco feature Navigator confirmed it's su...

ahmede_2 · 09-28-2015

I'm trying to run BFD for OSPF between 6500E running version 12.2.33 SXH and Nexus 5596UP running Ve...

ahmede_2 · 07-22-2015

I have 6500E with Sup 2T, running the latest IOS 15.2.1SY1, I'm trying to configure ISIS IPv6 under ...

ahmede_2 · 05-13-2015

We are trying to configure a PBR with multiple tracking. We need to track local IP address and remot...

ahmede_2 · 06-08-2014

I have Nexus 5596UP switch running ver 5.2.1, I recently added Layer 3 card to the swicthes, L3 card...

ahmede_2 · 04-01-2013

This is the output of the "show queueing interface x.x" from the 6500 (WS=X6708-10GE, 1P7Q4T), I kno...

Thank you. So if I want to