I am trying to get an EHWIC-4ESG working in a 2901 and am having a couple issues. Everything I've read says that this card is compatible with this router. We've tried 2 of them now from the same source and both have acted the same. Please see below f...
Hi. I was wondering if anyone has been able to get the captive portal functioning with ISE. We would like to use the ISE portals in this scenario. If anyone has, is there a step by step out there somewhere to follow? I'm running into some issues and ...
I was wondering if anyone could give me instructions on how to set up ACS for TACACS+ on a 300 series switch using Authorization? I can get it to work to authenticate, but the authorization doesn't seem to work like a catalyst switch. Thanks in advan...
I can't seem to find and answer to this, but is it possible on a 2504 WLC to trigger a configuration backup when the configuration is saved like on Cisco routers and switches? If so, how do you set it up?
I am trying to figure out exactly what I need to buy to to connect to an ISP's fiber switch. We need to install a router between the fiber switch and our own core switch to be able to access the IP's allocated to the property. We installed a 170...
Unfortunately, they we bought used. I just want to make sure we are dealing with a bad card vs and incompatible one. I did just dig up the follow log, but I could not find the reasons for it when I tried to search: %EHWIC_ERR-3-PLL_LOCK_LOSS: EHWIC I...
Actually, it is about both I wanted to start out with the internal portal and make sure it works and then work in the custom portal. I just posted the pic to show what was available, but I did set up the items as you lay out above. I know pfSense ca...
So, I guess to be more specific, pfSense has a built-in portal and can simply send out a RADIUS query without engaging the ISE captive portal mechanism. I've been able to get access-accepts from other devices use ISE and RADIUS, but for some reason t...
Thanks folks. I appreciate the feedback. The guides are definitely a help. Right now I'm just trying to authorize with the built-in portal and it's getting failed. I have searched quite a bit and can't find anyone who has done this with ISE (or ACS f...
