About ckilday

ckilday · 10-04-2017

A customer has a 2821 router with an AIM\-VPN/EPII\-PLUS encryption module installed internally. One of the fans failed and I've been tasked with finding an upgraded replacement. Is there a newer model which supports VPN and encryption either through...

ckilday · 07-25-2017

As a result of the clocking component failure, we have to replace a number of 4331 routers. What procedure do I follow to transfer the existing software licenses from the equipment being RMA'd to its replacement device? Thank you.

ckilday · 05-04-2017

I have a 3750e switch running universalk9 12.2(55)SE1 code. It is configured for routing and even has an eigrp process configured with legitimate networks, etc... It also has the command "eigrp stub connected static" configured. When I tried to remov...

ckilday · 04-20-2017

I have a 4-switch stack of 3750X's and at least one of the ports on switch 2 is "cycling" through random (and bogus) output drop totals. I've seen the number go from 0 to 4418839 the next time I did a "show interface" and then have it drop back to 0 ...

ckilday · 03-30-2017

I tried to upgrade a 2960-8TC-L switch to c2960sm-lanbasek9-mz.150-2.SE10a code but when I attempted to reload the unit, I got the following message on the console: "File "flash:c2960sm-lanbasek9-mz.150-2.SE10a.bin" uncompressed and installed, entry ...

ckilday · 04-20-2017

I think that's the way I'll go. I see Cisco is recommending 15.0(2)SE10a code for the 3750X's. There happen to be about 10 3560's hanging off of this stack. I'm thinking of standardizing them on 12.2(55)SE11). Have you heard of any problems with thos...

ckilday · 03-30-2017

Leo, here's what happened. The switch powered up into the "Switch" prompt without us having to use the mode button. We entered the flash_init command and the system followed it. We then tried the load_helper command, but the system said this was an u...

ckilday · 03-30-2017

I will have to get back to you later on this. Not sure if my guy can get back there today. The "load_helper" did not appear on the screen capture. Gives me some hope. I will reply once we get a chance to try your sequence. Thank you.

ckilday · 03-30-2017

The document you suggested covers the basic stuff we've already tried. However, because I can't delete any of the existing IOS files because of the "invalid argument" response, there's insufficient room in flash to upload another copy of IOS. The "in...

ckilday · 03-30-2017

The technician I was working with has left the site. This switch is a mirror image of its uplink switch and the original flash looks like this: 6 drwx 512 Feb 28 1993 15:09:39 -09:00 c2960-lanbasek9-mz.122-50.SE5 When I open that directory...

Member Since	‎12-12-2000 11:38 AM
Date Last Visited	‎02-25-2019 04:27 PM
Posts	13
Total Helpful Votes Received	5

User Statistics

User Activity

Need a replacement for a 2821 with AIM\-VPN/EPII\-PLUS encryption module

License Transfer procedure for RMA'd equipment

How do I get a switch out of eigrp stub mode?

Switchport output drops cycling from 0 to numbers in the millions

failed 2960 ios upgrade - unable to revert back

I think that's the way I'll

Leo, here's what happened.

I will have to get back to

The document you suggested

The technician I was working