About josephjmg

josephjmg · 04-25-2019

CCOB-4F-2960X#dirDirectory of flash:/*SNIP*6 -rwx 16800768 Apr 25 2019 10:04:25 -04:00 c2960s-universalk9-mz.152-2.E9.bin 122185728 bytes total (83666944 bytes free)CCOB-4F-2960X#verify flash:c2960s-universalk9-mz.152-2.E9.binFile system hash verific...

josephjmg · 04-19-2019

I have a 1702I and need to deploy them in remote parts of the building, without running more cable. I have a POE access port facing the AP, but I'm trying to steal a PCs cable and just plug the PC into the aux port but I can't get an IP when I do tha...

josephjmg · 04-16-2019

So I have a question about getting remote wireless APs to connect to the WLCs. Here is the basic setup: [AP]---[L3 Switch]---[Router]---[L3 Switch]---[WLC] (running EIGRP between them) I have the 192.168.222.0/24 subnet built on the switch that i...

josephjmg · 02-26-2012

Let me first start off by thanking anyone who can help me get this figured out :-)So I'm trying to set up a site to site tunnel between two ASA's, but it's going to be used as a backup (since they are already connected by an MPLS cloud). So basically...

josephjmg · 10-19-2010

I am trying to use WCS Calibration and collecting data points using my tablet. I am having a problem where over 80% of the time it says "No data points collected starting from location (x,y)" However, if I stand in that same exact spot and do it eno...

josephjmg · 04-25-2019

The /md5 part worked, sorry to have wasted your time with such a simple thing. Thank you for your help!

josephjmg · 04-23-2019

Anyone? I mean, online it says that I can hook things like printers and IP cameras etc. to it, but I don't see mention of a PC. Although, I fail to see the difference...

josephjmg · 04-18-2019

OK, I went ahead and did that and it's connecting. Thanks for the help!

josephjmg · 04-18-2013

I'm having similar issues as well. I've been using the 871W for a few years now, and have always been happy. Even up until recently, when I first started with my 50/5mbps service, I could pull 50mbps without a problem. It was glorious. Now, I can bar...

josephjmg · 04-17-2013

I'd also like to add that I'm having sort of the same problem, but only when under load.I have a 50mbps connection and used to be able to utilize that no problem. Now, when I hit 30mbps, I get packet loss to the 871w, from it to my servers, and I can...

Member Since	‎10-19-2010 06:22 AM
Date Last Visited	‎05-29-2019 12:06 AM
Posts	13

User Statistics

User Activity

Problems verifying image on flash

Using AP Aux port for a PC

Wireless Setup across layer 3 interfaces

Site to Site between two ASA's

WCS 6.0 Calibration issues

Re: Problems verifying image on flash

Re: Using AP Aux port for a PC

Re: Wireless Setup across layer 3 interfaces

Windows 7 and Cisco 871W /wSDM Causing Slow Internet and Downloa

Re: packet loss Cisco c871