I have 3 public DNS Servers and I want to provide them as HA Service. The question is now how can I establish this without a physical load balancer. My idea is to use LACP to get this working.Goal:The 3 Servers should be connected to the Switch where...
Dear CISCO Team!Currently I have the problem that the SA540 SSL VPN will not work when using Windows 8 x64.Is there a time line to fix this problem? Hope to get this issue solved asap... :-(Best regards,Torsten
Currently the WRVS-4400N will only support IPv6 limited.Is there a time line when this device will support IPv6 also on the WAN Interface? I want to move over to IPv6 complete and get rid of IPv4.PLEASE!!! START TO SUPPORT IPv6 FULL ON EVERY DEVICE!!...
I have invented an AI and a DNS solution which protects your system within a never seen way.Long story short, all poison online threats will moved to a blacklist filtering system and at the moment I protect against various threats. At the moment I fi...
Thanks a lot for this answer.NAT might be an option because the DNS Servers will become a high load system. At the moment I have round about 15 Million users on my DNS Servers but I have no chance to do a reboot or something like this. All systems ar...
Thats the solution??I have bougt the SA540 half an year ago. I also bougt SmartNet for this device and if this is real...I will not longer extend my partnership Status because that was the reason why I changed to CISCO. It was because of the Service....
Congratulation m8! :-)This is not a solution. This is an challenge ;-)In short answer, yes - it is possible.http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080093f6f.shtml