About turfsniffer0

turfsniffer0 · 10-27-2015

Hi,We have a VIP configured for a server-farm which hosts a specific web service that is mostly used for internal users. When the users is browsing and clicks an option on the browser the get a blank white screen (instead of data). The server-farm ho...

turfsniffer0 · 04-19-2013

Hello,Was wondering if someone can help with a problem. I have a customer at a remote location that connects via DSL and they connect to corporate network over an ipsec tunnel. I don't support the line or the cisco router, (only the tunnel) - but wou...

turfsniffer0 · 04-05-2013

Hi Guys,I've successfully setup an ipsec tunnel between a remote office and a ASA firewall at customer HQ. Traffic is flowing both directions and everything seems fine, however users at the remote site are complaining off extemely slow internet (via ...

turfsniffer0 · 03-25-2011

Hi Guys,We have a "core" router in our WAN that has started misbehaving. I first noticed the problem when I couldn't remotely log into the unit, we have a connection through the aux port to another 7206 on the same site and this also wouldn't allow a...

turfsniffer0 · 08-19-2010

Hi Guys,I'm trying to install LMS 3.2 onto a server on a fresh install of Windows 2003 Enterprise x64 platform (virtual) and keep getting the error "Cannot create the install dependency file".The install log shows:Executing command:"C:\DOCUME~1\ca-sd...

turfsniffer0 · 01-28-2016

Thanks Richard, haven't seen it before but the ssl cert and key already exists and work fine for other server farms, so I don't think it's relating to the configuration of the ssl offloading itself - but more to do with the load balancing configurati...

turfsniffer0 · 01-14-2016

Just an update on this issue. Had to get ssl certs installed on both client and server to allow ssl offloading to be turned off so that the client talks to server directly over port 443. The issue disappears with offloading disabled and reappears whe...

turfsniffer0 · 04-10-2013

well spotted Steve - didn't notice the ports! Have no idea to be honest and a reboot is probably out of the question (it might not sort the problem either).It would do no harm sticking on vty ACL's to just permit telnet and/or ssh on the vty's. But i...

turfsniffer0 · 04-10-2013

Hi Gordon looks like you did the following and then issued the show tcp brief command?clear tcp tcb 52DD3F38clear tcp tcb 5295B9C4clear tcp tcb 52DD43FCclear tcp tcb 52DD6378if so just clear the line again doing the following:ol-dr-6509-01#clear line...

turfsniffer0 · 04-10-2013

Sorry Gordon, my mistake - the command should be show tcp brief not show tcp tcb - you'll see the TCB indentifier on the output.

Member Since	‎07-15-2010 03:56 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	30
Total Helpful Votes Received	5

User Statistics

User Activity

Connection reset on ACE

DSL and interleaving

Ipsec tunnel issues between router and ASA 8.3

Cisco 7206VXR running 12.3(8)T suspected memory leak

LMS install error

Thanks Richard, haven't seen

Just an update on this issue.

Only one user can log into a switch via Telnet

Only one user can log into a switch via Telnet

Only one user can log into a switch via Telnet