About BW Dijk

BW Dijk · 10-24-2023

Hi, I got a brand new Roomkit EQ, this nice piece of technology is working fine when setup in the Webex portal (Control hub). But (after a factory reset) I cannot get it to work on SIP or H323, tried our VCS and Pexip registration. The unit will regi...

BW Dijk · 09-26-2022

I have a room setup with a Webex Room Kit Pro or a SX80 and 3 monitors, these monitors are directly connected to the Codec.(SX80 is running ce 9.15.13.0, this unit I'm using for testing) At the HDMI Inputs of de codec we have; HDMI input 1, Cisco Qua...

BW Dijk · 04-04-2022

With a number of SX80 codec's I noticed that they go in to maintenance mode, after a power reboot or a software update like in my case going from CE 9_15_0_13 to CE 9_15_3_26, and also tried CE 9_15_10_8Most of the times A factory reset will fix the ...

BW Dijk · 12-30-2021

Hello all,At client’s sites and at our office we have several codec's, Roomkit, Roomkit Plus, SX80, that is giving a Certificate Expiration issue. I read the admin guides and tried to find similar issues online and here in the Cisco Community but cou...

BW Dijk · 01-10-2014

Our Company received a Tandberg 3000 MXP Tactical.This unit was not working becouse of a software failure.The owner tried to fix this, by opening The hole case where The codec was buld into. By doing this they damaged The external IR transmitter boar...

BW Dijk · 03-05-2024

Hi Soohyung Choi,Thankyou for your comment, I found the solution some time ago and forgot to update the post.Setting the admin password is the solution, I had to chance my way of working, in the past I first checked if al is working as expected and t...

BW Dijk · 10-25-2023

Hi Ibrahim,Thanks for you suggestion, the thing is that the software version that worked is not for download on the Cisco Portal.I would really like to try but I can't access this firmware.Best regards,Bert

BW Dijk · 05-17-2023

Did you ty to upload a new firmware file?

BW Dijk · 05-17-2023

The solution is to boot the codec and the will regenerate the certificate. Or instal a new software immage

BW Dijk · 10-24-2022

I used the xAPI commands of the codec to fix my issue, to bad that the current screen compositions are not described in any manual, I rally would like know what je screen compositions are in- and out- of call when selecting the screen like first, sec...

Member Since	‎05-30-2011 12:01 PM
Date Last Visited	‎03-06-2024 12:10 AM
Posts	53
Total Helpful Votes Received	38

User Statistics

User Activity

Roomkit EQ codec SIP or H323 dailing not working - Dial command failed

Webex Room Kit Pro & SX80 - How to set monitor roles using 3 displays

SX80 in Maintenance Mode

Roomkit, SX80, A certificate is about to expire. Please, update.

Tandberg 3000MXP Tactical - inproper use caused damage

Re: Roomkit EQ codec SIP or H323 dailing not working - Dial command fa

Re: Roomkit EQ codec SIP or H323 dailing not working - Dial command fa

Re: Roomkit, SX80, A certificate is about to expire. Please, update.

Re: Roomkit, SX80, A certificate is about to expire. Please, update.

Re: Webex Room Kit Pro & SX80 - How to set monitor roles using 3 d