About andrewswanson

andrewswanson · 02-29-2024

HiI'm trying to profile a Summa vinyl cutter on ISE 3.2 patch 3. ISE profiler feed is up to date and the device is listed with the following MAC OUIOUI IEEE Registration AuthorityWhen I looked up the MAC Address on the IEEE site, the first 6 characte...

andrewswanson · 01-25-2024

HiI'm looking at configuring a Catalyst C9300L-48P-4X running 17.09.04a to support both Dante and AES67.The switch is L2 with SVIs on upstream switch - all Dante/AES67 devices will connect only to this switch so no configuration is required upstream....

andrewswanson · 10-04-2023

HiI'm looking at getting an application using SSDP for service discovery (TTL of 1) working across subnets on a Catalyst C6880-X-LE. I've being looking at documentation on "Service Discovery Gateway" and "Multicast Service Reflection".Is this possibl...

andrewswanson · 09-19-2023

HiI recently upgraded an ISE deployment from 2.7 patch 7 to 3.2 patch 3. One of the PSNs failed during the upgrade so I deregistered the node and manually installed 3.2 patch 3 before re-registering it with the deployment.All services are working fin...

andrewswanson · 09-15-2023

HiI ran into the bug below after upgrading to ISE ver 2.7 last year. "External RADIUS Server" list is blank but previously added external Radius servers can be seen under "RADIUS Server Sequences"https://bst.cisco.com/bugsearch/bug/CSCwb04566The bug ...

andrewswanson · 03-18-2024

Interestingly, this looks possible with the Small Business switches using Green Ethernet Port Settings - this has a "Disable Port LEDs feature":https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-300-series-managed-switches/s...

andrewswanson · 03-18-2024

Dos the output of "show vlan" show both vlans 41 and 42 as being present on the 2960?hthAndy

andrewswanson · 03-11-2024

This link may help if you are looking at interface templates for authorization:https://community.cisco.com/kxiwq67737/attachments/kxiwq67737/4561-docs-security/5607/1/ise_neat-w-int-template.pdfhthAndy

andrewswanson · 03-11-2024

HiDo your switches support Interface Templates? It could be worth investigating if the authorization process is quicker if ISE specifies an interface template rather than a macro.hthAndy

andrewswanson · 03-11-2024

HiHave you tried the following:monitor session 1 source interface Gi1/0/52 bothmonitor session 1 destination remote vlan 220!monitor session 2 source remote vlan 220monitor session 2 destination interface g1/0/7See https://bohemiangrove.co.uk/how-to-...

Member Since	‎05-02-2006 05:16 AM
Date Last Visited	‎03-20-2024 12:30 AM
Posts	738
Total Helpful Votes Received	585

User Statistics

User Activity

Cisco ISE profiler feed and 28 bit MAC OUI's

AES67 and Dante on Catlayst 9300 query

Application using SSDP working between subnets

ISE TCP Dump query

Cisco ISE - blank "External RADIUS Server" page

Re: Cisco 3750x turn off led interfaces

Re: Devices in the same vlan cannot communicate

Re: Macro for 802.1x interface with multiple hosts

Re: Macro for 802.1x interface with multiple hosts

Re: Monitor Session on Catalyst 2960X Issue