Dears,is there any solution to integrate MS dynamics AX with CUCM8.5?The users want to dial numbers out of dynamics.We use CUCM8.5, CUP8.5 and CUPC8.5.Any way to do this?Without OCS/Lync. ;-)thx in advance.best regards,Marco
Hi,we use CUP8.5 with UPC8.5 and Unity Connection 8.5 for voicemails.I can play voicemails via UPC and the pc speaker. It is possible to hear the message on the ip phone an not pc speaker?best regards,marco
Hi,i swapped a Siemens against a CUCM8.5. behind the Siemens, the customer had three ISDN modem devices. This devices are used to share files with supplier.Now i need to connect this ISDN modem devices "through" the CUCM. Any ideas how to accomplish ...
Hi,we have five 4510R with 2 SupV-10GE each.Now i want to check the status of sup. The idea i to get an notification when one of the sup failed. I tried to check the sup with snmp. But the MIBs i found in the documentation are not unavailable?!IOS Ve...
Hi,i did not found any good solution. So we use the TSP client/integration. The MS dynamics had to be adjusted. Now it works but not very stable. ;-/regards,marco
Hi,its solved, i have a working configuration: Perhaps this helps someone.Network Diagram:PSTN|||H323 Gateway| || |_ISDN Router|CUCMConfiguration H323 Gateway:interface BRI0/0/0 description --- ISDN Router --- no ip address isdn switch-type b...
Hi Ryan,thanks for reply.I tried this:PSTN (Telco)||MGCP (with VIC2-2Bri-NT/TE)||CUCM8.5||H323 (with VIC2-2Bri-NT/TE)||ISDN Modem DeviceIf i connect a ISDN Phone to the H323 Gateway. Is works. I can receive and place calls to PSTN.If i connect the IS...
Open a TCP port with the AccessList. Try a telnet to port 445 (if 10.250.1.9 is a Windows Station). Does that function?Which PIX OS version is running?best regards,marco
