About andy_4578

andy_4578 · 01-03-2023

We need to find a way of bypassing 802.1x port authentication for Avaya IP phones. The switch ports on our Cisco 9200 switches all have 802.1x authentication with NPS acting as the radius (No ISE or ACS servers). This works fine for PC's/Laptops whe...

andy_4578 · 09-10-2021

We've deployed an FTDv in Azure which appears to be working okay and has internet access through the associated Azure public IP on the outside interface. The VM's only seem to work when the default routes are supplied via Azure and use the Azure Inte...

andy_4578 · 04-07-2021

Hi, Can anyone point us in the right direction to setup Policy Based Routing on an fpr1140 via the FDM? We cant use the FMC as we dont have a virtual platform compatible (Hyper-V). The FPR's are running software version 6.6.0, according to this artic...

andy_4578 · 10-20-2020

Were trying to set up Anyconnect ssl VPN to use certificate auth which is working although the user has to choose the certificate during the connection process rather than an automated process. At the moment Anyconnect prompts during the connection p...

andy_4578 · 12-16-2019

We currently operate a "Tunnel All" policy for vpn traffic due to conditional access of hosted applications (Traffic must come from the head Office IP). What were finding with the increase in remote workers with fast home connections is there saturat...

andy_4578 · 01-05-2023

Hi All, Thanks for the responses, im still working on getting MAB working with NPS, without the phone in play 802.1x works perfectly along with automatic vlan assignment - adding the phone to the mix just shuts down the switchport at the point the ph...

andy_4578 · 08-10-2022

Was a solution found? were experiencing the exact same issue with the management tunnel where the AnyConnect client will randomly popup trying to manually connect, this disconnects the Management tunnel until you cancel the AnyConnect connection. Th...

andy_4578 · 09-15-2021

Hi, Initially, we were simply trying to get the Azure VM's to go through the vFTD for there internet access so the dynamic NAT rule should have been fine, there wasn't any VPN's configured at that stage so no need for LAN to LAN traffic being exempt....

andy_4578 · 09-15-2021

Hi All, Traffic to the .5 subnet was routed correctly, we could ping the inside interface of the FTD from the Azure VM's and vice versa. The NAT rules to be honest there was just the single dynamic rule translating any inside address to the outside i...

andy_4578 · 04-09-2021

For anyone else that needs to configure PBR via the FDM it is possible. Configure an extended acl via the Smart CLI objectsConfigure a Route map via the Smart CLI objectsConfigure a flexconfig object to apply the routemap to an interfaceDeploy the co...

Member Since	‎11-11-2009 01:30 AM
Date Last Visited	‎09-27-2023 12:02 AM
Posts	158

User Statistics

User Activity

802.1x port authentication - IP Phone bypass

FTDv in Azure

PBR on FPR1140 6.6.0

Anyconnect defaults to selfsigned certificate

Rate Limit AnyConnect vpn users on ASA 5525

Re: 802.1x port authentication - IP Phone bypass

Re: AnyConnect Management Tunnel Issues

Re: FTDv in Azure

Re: FTDv in Azure

Re: PBR on FPR1140 6.6.0