My GW AS5350 is running IOS Version 12.2(15)T14I dont know why many many calls in my gateway have a same call ID: 296F when i do the command: "show call act voi br" or "sh call his voi br". I thought each call is assigned one separated call ID.Could ...

Hi All,I have some gateways AS5350/AS5400, each connects to severall carriers via E1/T1 TDM ISDN links. These gateways are sending CDR to an ACS radius serverHow can I sperate CDR for billing and mediation purpose to each carriers. Is it possible to ...

Hi All,I got the below message when debug ISDN Q931:====================================Sep 1 14:04:11: Facility i = 0x9E0100036774640000002E49414D2C0D0A474349 2C33393835303836663166363031316363383535646437383165346665376265350D0A0D0A Unknown Service...

Hi All,I connect Back-to-back one Cisco gateway AS5350 to a Vocaltec gateway via ISDN PRI links. Some test calls went thru, but most of call got disconnect code ISDN102, timer expiry. I tried set Cisco side as either network or user simulation but go...

Hi All,My GW5350 is running System image file "flash:c5350-is-mz.122-2.XB7.bin"I have connected back2-back to a Vocaltec gateway, my test calls are good quality with short PDD, with my controller default clock source line. However for testing purpo...