About i.va

i.va · 02-23-2023

We are running ACI 5.2(6e). The Object Store on ACI leaf/spine switches can be accessed via HTTP and HTTPS by default. The Object Store is protected via login form, but we need to disable access completely i.e. stop the switches from listening on HTT...

i.va · 01-21-2021

I have APs in FlexConnect mode connected to catalyst 3850 v16.3.7 switches. Find the port configuration below. I want to authenticate the clients on AP trunk ports via MAB using the Cisco-AVPair "vlan-id" sent during REQUEST for our 3rd party RADIUS ...

i.va · 05-08-2019

We have a Cisco network (3850 stacks with Converged Access running v16.3.7) and a Syslog Server (Splunk). I would like to send SNMP traps as Syslog messages to our Syslog Server. Reason being, that our rogue AP detection feature only seems to send SN...

i.va · 06-20-2014

Hi,I have been assigned the following challenge: a customer wants to build 2 datacenters and connect these to a L3 backbone. I have attached a (very) simplified network diagram. Challenge: The customer wants to span a L2 domain across both DCs and ne...

i.va · 12-04-2013

Hi,I have set up the following in a lab:Prime Infrastructure 2.0 (2.0.0.0.294)Cisco Secure ACS 5.4.0.46.0aWindows 2003 Domain Controller för AD AuthenticationGoal: Admin access to network devices requires Authentication via TACACS+ to ACS (-> Active ...

i.va · 03-08-2023

Hey...thanks for your input...there is hardly any information on this, so I ended up blocking this via firewall. Hopefully we will have some more options for hardening in future releases.

i.va · 05-20-2019

Hi Thanks for your input guys. I forgot about EEM...will check it out! Kind RegardsIngo

i.va · 05-08-2019

Hi MarkThanky for your reply. This also seems to also be the other way around: to send Syslogs as SNMP traps or informs to SNMP server. I need to send SNMP traps as Syslog messages to a Syslog server. I also found the command "logging snmp-trap", whi...

i.va · 09-28-2016

I am also missing this command on the 3850 03.06.04.E platform while using similar config as above. When debugging radius accounting, I do not see any info sent. Sep 28 10:19:56.587 CET: RADIUS/ENCODE(00000000):Orig. component type = InvalidSep 28 1...

i.va · 11-26-2015

Have the same issue...been searching the net today, but have not found anything on this yet. :(

Member Since	‎06-14-2008 11:36 PM
Date Last Visited
Posts	164
Total Helpful Votes Received	26

User Statistics

User Activity

Block access to Object Store on ACI leaf/spine switches

dot1x MAB re-authentication vlan-id

Send SNMP traps as Syslog messages

Loadsharing between 2 Datacenters

Prime 2.0 Partial Collection Failure

Re: Block access to Object Store on ACI leaf/spine switches

Re: Send SNMP traps as Syslog messages

Re: Send SNMP traps as Syslog messages

I am also missing this

Have the same issue...been