About beconnect

beconnect · 03-22-2023

Hi all we have an ME deployment with two1852i now we bought 4x C9115AXI-EWC-E can you tell me if its better to create the Ewc new deployment and then join 1852i as “members” of the new “cluster”? ( assuming upgrade to 8.10 on the ME) Are they com...

beconnect · 02-09-2023

Hi All Could you please tell me if there is a need to upgrade Cisco 9400 that is on 16.11? IF yes what should be the version to go? Thanks

beconnect · 09-02-2022

Hi All On ASA 5516 with 6.2.3.6 is there any limit on creating network object or network groups and assigning them to security policies? We need to add, to an existing block rule, more than 950 IP addresses ( as hosts) and then assign them to a poli...

beconnect · 05-03-2022

Hi AllOn a Asa ASA5516-FPWR-K9 , base license only is it possible to block via a rule, some domain or site URL?I can block some IP's or networks, but not able to see how to block a domain or site Can you help?Firewall is running on versions:Cisco Fir...

beconnect · 07-19-2021

Hi All Migrating a existing stack of 4 Cisco 3750 to Cisco 9300 Configuration should be copy line by line , copying vlan.dat... Or there is any tool to check and copy the config? Regards

beconnect · 07-31-2023

Hi also be aware of the version that old 1832i have. i found easier to update first the ME to a 8.10 version and then to the conversion to capwap. After that , it should be more smooth the joinning to the EwC see also this: https://community.cisc...

beconnect · 05-29-2023

Hi Rich thanks it worked good , with external DHCp LAb completed successfully! Cisco 9115 as EWC, mixed with 1852i , all on version 17.9. Final stage is to implement this on a running ME with 1832i and 1852i AP's. I will upgrade the ME to 8.10 , th...

beconnect · 05-26-2023

Hi Rich Yes. I was reading about the vlans. In the ME it was possible to get vlans and DHCP inside the controller. SO in the EWC virtual controller we should only configure the vlans info on the flex profile , assign that to the AP's and put inside ...

beconnect · 05-25-2023

Hi All almost at the end of the configuration of c9115axi. Working with default vlan 1 now. Its not easy or straightforward but we get there. I have now vlan X for AP mgmt and vlan Y for SSID I have configured the SW port as trunk with both vlans X,...

beconnect · 05-23-2023

Hi all After a few time I am back I have 2 AP EWC capable on, but when I disconnect the current active controller , there is no standby. What could be the cause? Monitoring says that stanby is disabled Could you help? Thanks

Member Since	‎03-04-2013 04:40 AM
Date Last Visited	‎08-02-2023 12:02 AM
Posts	102
Total Helpful Votes Received	11

User Statistics

User Activity

C9115AXI-EWC-E Mixed with AP 1852i ME

Cisco 9400 upgrade 16.11

ASA 5516 network group limit

ASA Firepower block domain or site

Migration Cisco 3750 to Cisco 9300

Re: Joining Aironet 1832i to new Catalyst 9115axi ewc

Re: C9115AXI-EWC-E Mixed with AP 1852i ME

Re: C9115AXI-EWC-E Mixed with AP 1852i ME

Re: C9115AXI-EWC-E Mixed with AP 1852i ME

Re: C9115AXI-EWC-E Mixed with AP 1852i ME