Shea Lambert
Level 1
Level 1
Member since ‎09-30-2004
‎08-18-2017

User Statistics

  • 24 Posts
  • 0 Solutions
  • 25 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
10 Replies
5 Replies

User Activity

I have a request concerning the recommended configuration of multiple UCSM's into two MDS 9148s.   My current production UCSM (two chassis') is connected, via port channel groups, to the MDS 9148s; which are connected to one EMC VNX SAN. What I'd lik...
I have a B230-M2 that is going to be SAN booted to a VNX with an MDS 9148 in between.  The vHBA's are seen all the way through to the Array, but when I go to boot via the CD/DVD Virtual Media nothing comings up.  The server goes straight to: Reboot a...
1.4(4f) has a later release date then 2.0(2q). Are both being actively being upgraded?  Which release are we supposed to use? 
I'm trying to allow pop and pop3s traffic through my pix to a 2003 Exchange server. Internally when I telnet to port 110 it works but when I try from the outside it doesn't work. static (inside,outside) [Public IP] [Internal IP] netmask 255.255.255....
I have a Cisco 1700 router hanging off an ethernet port on my PIX. The router needs to be able to create a VPN through the PIX and yes it has to go through the 1700. If I have the device connected directly to port ethernet 5 what commands do I need...
Community Statistics
Member Since ‎09-30-2004 06:14 AM
Date Last Visited ‎08-18-2017 03:56 AM
Posts 24
Helpful Votes Given To