Hi All,I was checking cisco router with some different configuration.ISP (122.160.43.1)<--------------------------->(vlan2)(122.160.43.105/30)ASA5505(ios 8.2)And internet is absolutely working fine. Still couldn't figure out what must be the configur...
Hello All,We are currently facing an asymmetric routing issue. Please find the attached network diagram. The firewall in the network is dropping the final ack packet as it has never received syn/ack packet. Is there any solution to these kind of netw...
Hi All,we have an ISP that is providing us one public IP with gateway. Also any traffic NATed with that IP should also be tagged with VLAN 100Ex: Public IP - 1.1.1.1 and the gateway is 1.1.1.254; VLAN 100Also same ISP has provided a pool of public I...
Hi All,I have a scenarioR1--->Switch<----R2 | | R3R1 is connected to internet, and ospf is running on all three routers. we have redistributed the static default route in to the R1.But we want to write a route-map which...
Hi All,We have a static route that is redistributed with metric 1 in to OSPF and it is properly advertised on all routers. But we want to one router to be exception. We do not want this static route on this router. Below is the config on my router. r...
Hi Alain,But in this case, as you see R2 and R3 are in same broadcast domain.R1 is attached to R2 and R3 on same interface. Or please advice how to block it on R2.Regards,Ravi
Hi Blau,I thought of this but that requires me to change the area in more than 15 routers. And all these routers are with ISP. Not feasible.Really want a solution.Regards,Ravi