Is there any command for CUCM to run from CLI which can give us which switchport it is connected to?Something like show cdp neighbor.I have tried different commands from CUCM CLI but none of them is giving this basic information.Is there a SQL query ...
Customer is using Call manager 7.x and have lost CAR admin password.Now they can login with a user but cannot generate QoS Detail reports. To run those reports the user must have Admin privileges. Problem is that we cannot assign admin privileges unt...
We have a CUCME router connected to a E1 PRI circuit. All outgoing calls must be prefixed with a carrier pre select code of 1320 for cable and wireless to route the calls correctly.We are experiencing an issue whereby the connected number display on ...
Can someone please help me in resolving this issue for a customer using CME 7.0. They can transfer calls to internal number fine but when they try to transfer an external call to an external number the call just dropes as soon as they hit transfer ke...
Hello,I am working on a issue for a customer where when a caller makes an outbound call, there is a delay of 8-10seconds before the caller hears rinback tone. I have made interdigit timeout to 2 but still the same issue. Are there any settings which ...
I had the same issue where I was getting error like below from both Call Managers configured on the Gateway under sccp May 7 09:11:48.017: SCCP(ANAXXXX2E4405)rcvd RegisterRejectMessageMay 7 09:11:48.017: sccp_appl_service_stop_timer: Stop 657C1904 ti...
I have had this problem today where my Cisco Anyconnect VPN stopped working. It was working all fine until my home broadband hung and rebooted itself. I restarted the PC but Cisco Anyconnect won't come up. I was having errors like "VPN Service is not...
Hello,I know this an year old issue but thought to answer it for the benefit of someone else who may stumble upon this thread.I had a similar issue for CUCM 9.1.2 and phone was 7841 SIP. The issue was that phone was registering and then unregistering...
