Hi there, Is there a fairly stable mainline version of IOS for ISR G2 routers, such as 2900s, that supports Onepk? ... View more

Greetings, We at times will see our wireless clients lose network access sporadically when accessing either the Internet or local servers on our network.  We have a pair of Nexus 3064 switches configured in a VPC providing all layer 3 services at this facility and everything works great except for our wireless users.  It doesn't appear to be an issue with our WLC, which is a Cisco WLC 5508 residing in a remote data center. The solution is to ping either of the "Real" IP address on the SVIs of the Nexus switches, not the HSRP address.  Has anyone seen this before?  Here is a config snippet of the SVIs and VPC setup. Primary Nexus 3064 interface Vlan20   ip address 10.x.x.2/23   ip verify unicast source reachable-via rx   ip router eigrp 100   ip passive-interface eigrp 100   ip proxy-arp   hsrp 20     authentication md5 key-string h5rp1     priority 200     timers  1  3     ip 10.x.x.1   ip dhcp relay address 10.x.x.40   no shutdown   description WIRELESS Secondary Nexus 3064 interface Vlan20   ip address 10.x.x.3/23   ip verify unicast source reachable-via rx   ip router eigrp 100   ip passive-interface eigrp 100   ip proxy-arp   hsrp 20     authentication md5 key-string h5rp1     priority 200     timers  1  3     ip 10.x.x.1   ip dhcp relay address 10.x.x.40   no shutdown   description WIRELESS VPC Configuration on the Primary version 5.0(3)U2(2a) feature vpc vpc domain 1   role priority 700   peer-keepalive destination 10.10.1.2 source 10.10.1.1   delay restore 300   peer-gateway   auto-recovery reload-delay 300 interface port-channel1   vpc 2 interface port-channel510   vpc 510 interface port-channel511   vpc 511 interface port-channel512   vpc 512 interface port-channel513   vpc 513 interface port-channel514   vpc 514 interface port-channel515   vpc 515 interface port-channel516   vpc 516 interface port-channel517   vpc 517 interface port-channel800   vpc peer-link VPC Configuration on Secondary Nexus 3064 !Command: show running-config vpc !Time: Tue Apr  3 13:19:22 2012 version 5.0(3)U2(2a) feature vpc vpc domain 1   role priority 800   peer-keepalive destination 10.10.1.1 source 10.10.1.2   delay restore 300   peer-gateway   auto-recovery reload-delay 300 interface port-channel1   vpc 2 interface port-channel510   vpc 510 interface port-channel511   vpc 511 interface port-channel512   vpc 512 interface port-channel513   vpc 513 interface port-channel514   vpc 514 interface port-channel515   vpc 515 interface port-channel516   vpc 516 interface port-channel517   vpc 517 interface port-channel800   vpc peer-link ... View more

Hi, Does anyone know when Netflow will be released on the Nexus 3000s? ... View more

Hi, We recently deployed a server farm where we noticed an increase of 200ms with processing versus when we had a single server in place.  Can someone advise what the expected increase latency should be when moving a group of servers behind the ACE Load Balancers?  Is the 200ms normal? ... View more

Does anyone know if digitally signed CIFS is supported on WAAS?  If not now, when? ... View more

Hi, I recently deployed a pair of Nexus 3064s with VPC and they're performing the Layer 3 routing for all vlans.  One thing I've noticed is while connected on Wireless, I often lose connectivity to the rest of the network.  The only way I can restore my network access is to ping one of the Nexus 3000's vlan interface.  Does this make sense????  I often lose connectivity, probably around 3 times a day. Any help would be much appreciated. ... View more