Im trying to setup a cisco 87x isr. On FA 0 i have the default switchport access vlan 1 with ip address 10.0.10.2 which is connected to a consumer DSL router ip address 10.0.10.1 and with nat enabled.Now i enable fa1 and set switchport-access vlan 11...

I have a cisco 877w and ive setup two ssids on it each with different vlans (I intend to use the zone based firewall to lock down the guest zone later) the wireless connection is working and i can ping the entire network (because of the 10.0.0.10 int...