About jeff.kish

jeff.kish · 05-11-2016

I've spun up UCS Director and created my first VM via automation - woo! Now I'm confused as to how my users can access it. I configured UCSD to deploy a VM with Windows 2008 R2, and it successfully mounts the ISO. However, it's waiting on user inp...

jeff.kish · 05-11-2016

I've spun up UCS Director and created my first VM via automation - woo! Now I'm confused as to how my users can access it. I configured UCSD to deploy a VM with Windows 2008 R2, and it successfully mounts the ISO. However, it's waiting on user inp...

jeff.kish · 06-25-2014

When I use DCNM to discover a Nexus 5548, entering its mgmt0 address (172.16.x.190) as the seed, DCNM finds it but lists it as 1.1.1.190. It takes a long time to discover for some reason, too. When I open the fabric, it cannot access the switch unt...

jeff.kish · 04-18-2014

Hey all,I'm doing some UCS studying and I'm trying to understand how private-vlans work within UCS, but there's surprisingly little documentation on the subject. So far, based mostly on trial-and-error, these seem to be the rules for using pvlans in...

jeff.kish · 06-27-2012

Anyone have any idea how many subinterfaces can be created on a 1941?Thanks!Jeff

jeff.kish · 05-12-2016

Hey everyone! I've spun up UCS Director and created my first VM via automation - woo! Now I'm confused as to how my users can access it. I configured UCSD to deploy a VM with Windows 2008 R2, and it successfully mounts the ISO. However, it's wait...

jeff.kish · 08-14-2014

In my case, the problem ended up being that the customer had unknowingly configured the management interface with 1.1.1.x. Since this wasn't a routable subnet on their network, DCNM just continued to use the discovery address as its point of control,...

jeff.kish · 04-19-2014

Heya Jim :)I had always understood them to be FRU. Check out figures 4-6 in the data sheet.http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-x-series-switches/data_sheet_c78-696791.htmlWe recently had to do this on a Nexus 6K a...

jeff.kish · 04-19-2014

Hi Manny! Welcome to UCS :)First, you're looking at some outdated hardware. The 6100s were first gen and have been end-of-sale for a couple years now. You should be looking at the 6200s instead (http://www.cisco.com/c/en/us/td/docs/unified_computi...

jeff.kish · 04-18-2014

Well, nevermind, it seems I had a misconfiguration in VMware. User error :) Here's what I found: - No tagging required from VMware. Port groups should remain untagged. - The vNIC must be configured ONLY for the secondary/isolated vlan. - It doesn'...

Member Since	‎08-13-2008 06:35 AM
Date Last Visited	‎02-22-2022 08:39 AM
Posts	676
Total Helpful Votes Received	213

User Statistics

User Activity

How to access UCSD-provisioned VM?

How can I access a UCS Director-provisioned VM?

DCNM Discovery Seed address

UCS private-vlans

Maximum Subinterfaces on a 1941

Re: UCSD Workflow INDEX (UCSD Technical Content Index)

In my case, the problem ended

Heya Jim :)I had always

Hi Manny! Welcome to UCS :

Well, nevermind, it seems I