About inayathulla1

inayathulla1 · 07-01-2008

Hi ,I have replaced Big5 with CSS 11506 and the issue is now the user on MAC System using spyware browser is not able to access the websites behind the CSS. kindly let me know is there any issue with interoptibility b/w CSS and mac with ferry browser...

inayathulla1 · 04-11-2008

Hi All,I am not able to login into the GUI. It shows only an blank screen in the browser when i try to access the WLSE thorugh the GUI.. But we are still able to connect over SSH to the box and reload it. After the reload the GUI login is working aga...

inayathulla1 · 01-23-2008

Hi,I have configure command:""bridge spanning-tree disable" on CSS but still i see my CSS acting as a root switch in the topology. Could some one tell me how do i completely remove the CSS from the STP.

inayathulla1 · 12-13-2007

I have IDS 4215(version 4) running fine for 2 years. suddenly i could not access the IDS4215 via console or telnet last month . I rebooted it but there is no change. Then We get the ROMMON prompt via CTRL-R. We executed the procedures in "Instal...

inayathulla1 · 11-07-2006

Hi Giles,I have CSS11506-2AC ConServSw and the Problem is sometimes the dst nat is 0.0.0.0 and sometime there is ip address. here is the nat table: 1) 172.25.11.171 8080 84.149.88.240 56618 84.149.88.240 TCP 4/2 4/1 & 2) 172.25.11.171 8080 134.109.96...

inayathulla1 · 04-26-2013

Hi,There is no need to specify '/" parameter under bootdisk statement.Below thread had many issues booting just go through once it might help give you some more info in case the module doesnt come up properly.HTHRegardsInayath

inayathulla1 · 10-19-2012

Hi Vg,Can you provide us the outputs of the following commands as well:- show platform health - show platform cpu statshow platform cpu packet statisticsI see the cpu is going high due to Interupts so kindly provide the requested ouputs and we sh...

inayathulla1 · 10-08-2012

Hi Kuldeep,Peter has clearly explained what you required. Let us know what exactly you are looking for? So tht we understand your requirement?thanksInayath

inayathulla1 · 10-08-2012

Hi Kuldeep,You would diffenetly getting answer from expert soon on this.But just to brief you about the Etherchannel or the question which you are asked for is:a) Etherchannel is not load balancing its does the load sharing.b) Coming to the dragram y...

inayathulla1 · 11-23-2009

Hi Giles,I have the same issue with me and when i reseached it I found an Bug and its been fixed in the 2.0 version.BUg:-CSCsv52331 Bug Details: ACE crashes with SRAM parity error : source OCM ME Hence this bug been resolved in A2(2.1) Release.Resolv...

Member Since	‎08-10-2006 03:11 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	61
Total Helpful Votes Received	9

User Statistics

User Activity

Cisco CSS 11506 Issue !! Plz help

Cannot connect to the WLSE using a Web browser.

CSS 11501 STP disable option

License on Cisco IDS 4215 Box

Destination NAT translation shows 0.0.0.0 on CSS 11503

Confirm boot statement

High CPU Utilization in Cisco3750 Switch

Etherchannel Concept not clear ??

Etherchannel Concept not clear ??

Re: ACE Crash due to SRAM Parity