About chris.mccormick

chris.mccormick · 11-13-2012

I have been reading for awhile now on all the Cisco forums on the 3560 and shaping egress traffic but I wanted to verify my thoughts on this. I have 3560 that connects to the ISP that is policing at 10Megs, I want to shape my egress traffic going to...

chris.mccormick · 09-10-2012

All, here is my current setup: Windows XP machines authenticating wireless using 802.1X to a Cisco ACS 5.3 that redirects the request to Microsoft Active Directory. All the statements that I make below are what I have gathered from reading on forum...

chris.mccormick · 11-13-2012

I did read a little on the "bandwidth limit" command but I found another forum, where people reported some issues. Is using the bandwidth limit command better than the shape command? What do you think of my shape command is it correct? Here is wher...

chris.mccormick · 10-25-2012

Simon, I was able to get the XP computer working by setting up a profile to authenticte "Machine Auth" only, when I tried to authenticate both machine and user it fails. At this point I am sticking with machine only.Thanks,CM

chris.mccormick · 09-12-2012

Thank you Tarik, I am working with my customer next week to test the anyconnect NAM, once I get the results I will reply back..Thanks,CM

Member Since	‎04-11-2011 02:13 PM
Date Last Visited	‎03-14-2019 11:42 PM
Posts	6

User Statistics

User Activity

Shape 3560 for 10Meg Metro-E Internet Connection

ACS 5.3 MAR Timeout with Windows XP

Shape 3560 for 10Meg Metro-E Internet Connection

ACS 5.3 MAR Timeout with Windows XP

ACS 5.3 MAR Timeout with Windows XP