Hello,I've been having some weird behavior with a recently implemented CME solution on ISR4331, all 8851 phones.1) group pickup activates call forward to the first digit of the pickup group (the pickup is successful)2) a call transfer from phone A to...
Hello Community,I'm trying to re-image a 4331, i can only boot to rommoni try to tftp the image to the device but there is no tftpdnld optioncan anyone share how to do this on the 4300 router?
Hello,
I am trying to install cue on ism and receiving the below output ending in error. I have tried this on 2 different ism and 2 different 2901 routers and get the same result, this leads me to believe that I am missing something. I have been ba...
I am having a similar problem with group pickupEnvironment is CME 11.5 running on ISR4331, phones are all Cisco-CP8851/11.5.1when a group pickup is done, the phone that did the pickup is set to cfa to the group numberfor example a gpickup for Group 4...
So I was able to make a little progress. I changed the ip unnumbered from the loopback to interface ip and gave the sm an ip off the subnet, updated the static route to the sm, and install progressed to this point and error'd again >
Enter languages:...
