About gzelks

gzelks · 03-10-2016

Hi All, I have an issue between nexus 77k and prime infrastructure (PI) where ssh sessions at the PI end are kept in ESTABLISHED state and on the Nexus they appear as tcp sockets (they do not appear as vty lines). Nexus 77k are running multi-context...

gzelks · 05-17-2015

Hi, Something that I have noticed with PI 2.2 in HA using the local model.When adding a new device, PI will auto configure itself to be the logging and snmp trap destination host. This is expected, however it will configure the destination host to b...

gzelks · 03-31-2014

Hi All,Does anyone know if there exists a list of upcoming new features for Prime Infrastructure 2.1? I'm particularly interested in two aspects:1) Topology views which have been on the roadmap for a while2) Whether PI can monitor for up/down reachab...

gzelks · 04-23-2013

Hi all,I have spent a bit of time looking and am unable to find an answer to some questions, was wondering if you could help.Simple scenario: When an AP goes down, the WLC will send a trap to a trap receiver (Prime Infrastructure)My questions are:1) ...

gzelks · 08-12-2015

Try creating a Dashboard in the Performance area. Creating a new dashboard in Performance area will allow you to add a Generic Dashlet form the drop down. it does not appear in the Add Dashlet list in Overview

gzelks · 05-28-2015

Hi, It appears as though the MiB you are attempting to load needs definitions that are defined in MiBs higher in the MiB hierarchy. These will need to be loaded first, before trying to load the MiB you are experiencing the issue with. Try loading th...

gzelks · 05-26-2015

Is anyone able to offer a comment?Thanks,

gzelks · 05-17-2015

Understood Igor. Just to complete the cycle for anyone else who is reading this, after failing back from secondary to primary adding devices presents the original problem.So my lab has a primary with the issue, where the secondary does not present th...

gzelks · 05-14-2015

Quick update.My lab system is in HA, I tried a failover to secondary and tried to manually add devices via the secondary in active state.Tried a device which is completely new (never been added to the system before), the pre-existing device I had pre...

Member Since	‎08-16-2001 09:48 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	20
Total Helpful Votes Received	5

User Statistics

User Activity

how to close/kill sockets or process id on nexus 7k and prevent PI ssh thread poool from exahusting

Prime Infrastructure 2.2 HA traps and logging to virtual IP address

PI 2.1 new features?

WLC and AP status trap trigger and poll interval

Try creating a Dashboard in

Hi, It appears as though the

Is anyone able to offer a

Understood Igor. Just to

Quick update.My lab system is