Hi im testing the QinQ feature between 2 ASR920 routers - i want traffic flow between 2 bridge domains and i want to use double tag for testing purpose. is it possible on the ASR920 to use a S-TAG lets say vlan 100 and then have the inner C-tag untag...
Hi Im running Prime Infrastucture and want to use SWIM for patch management, but i can`t transfer the Image to my devices, i have tried with diffent ASA Models but the result is the same im getting the error below
Distributing image [asa917-23-k8.b...
Hi
i want to leak prefix from one VRF to another based on a Prefix list.when i leak routes from VRF B to VRF A only static and Connected routes is leaked to VRF A, in VRF B there are also MBGP learned routesand they do not show up in VRF A.i was won...
Hi
I am testing the Cisco Smart collector at one of our customers site. I need to register on the SmartNet total care portal http://www.cisco.com/web/smartservices/sntc.html, to access to collector
When I try to add a contract as required so that I ...
Hi
the company that i work for is in the hosting business, each customer have there own Context on our ASA Clusters.
im in the process of migrating af Customer with a active subscription to CWS, to a context.
from what i can read in the CWS document...
ok - so the config below would would leave traffic for BD10 untagged, with a vlan100 as the transport vlan (S-TAG) interface TenGigabitEthernet0/0/2description ** ASR920-1 **no ip addressservice instance 10 ethernetencapsulation dot1q 100 second-dot1...
what did you find out ?
i am seeing the same thing on a pair of 2120 with a vFMC running 6.2.1.
when navigating in the FMC it is very slow especially when you go want to use Connection/events. deployents takes 5-10min
Hi again
i have copy/paste the route tabel on the router (Core) where the leaking is configured, the prefix 192.168.80.0/24 is leaked and is working, but on other routers (PE) in the MPLS the prefix is not present
hopefully this would clarify my prob...
Hi
thx for your reply.
when i use the import-map, both the static/connected and MBGP learned routes are leaked and present on the router where the leaking is configured, but the leaked routes are not learned on the other MPLS routers in our network....
i see i mised the part why i am using export instead of import. :-)
for some reason when i use import map, the routes that are leaked between VRF are only local present on the router that is doing the route leaking.
E.G when i route leak from VRF B...
