About KENT EITZMANN

KENT EITZMANN · 06-13-2011

If I'm using configuration synchronization between two Nexus 5k's, does the 'commit' just save to running config ? In other words, after using 'commit' do I manually have to login to both 5k's and copy running to startup ?

KENT EITZMANN · 10-14-2009

We have two Nexus 5020's that will be deployed in a data center with several FEX . I haven't decided yet whether to single or dual home the FEX's or if I'm going to use vPC's right away.Are there things I should consider when numbering the FEX's ? If...

KENT EITZMANN · 02-04-2009

Hi,What is the maximum number of Nexus 2000's (2148T) that can be connected to a single Nexus 5020 ? or this just dependent on the number of ports in the 5020.Thanks

KENT EITZMANN · 07-31-2008

This question involves a basic NAT overload setup using a 6500/Sup720 with native IOS. The plan is to have studentwireless traffic (using private IP's) PAT'd to public IP(s) as it is routed to the Internet.Since I don't have any large scale NAT exper...

KENT EITZMANN · 02-16-2007

I'm hoping someone can clarify a difference that I'm seeing between the PIX 6.x and FWSM 3.x.Assume a 3 interface firewall (outside,inside,dmz) with no address translation going on at all. The inside has the highest security level, the dmz is lower, ...

KENT EITZMANN · 10-19-2009

In case anyone else was wondering about this, I asked my SE about it. He says that you should keep your FEX's numbered differently between different 50xx's, if you do end up dual homing the FEX's you will have problems if they are the same number.

KENT EITZMANN · 10-16-2009

That's my understanding also, you can only do port channels to the host when you use a single connection from two different single homed FEX's (using vPC). Back to my original question, for those with multiple 5020's and FEX's on each one, are you ke...

KENT EITZMANN · 08-11-2008

The WiSM is only supported in IOS. Keep in mind, with the 6513 the WiSM will only work in slots 9-13. The WiSM also requires the Sup720.

KENT EITZMANN · 02-16-2007

David,Thanks for the reply. So, if I'm not using address translation and follow these steps with the FWSM I will be Ok ? - no nat-control- no nat0 statements- no static statements- control packet flow with access lists

KENT EITZMANN · 05-03-2006

I'm not having any problems with the operation of the FWSM. I periodically collect ARP information from routers & PIX's and store them in a database. For the PIX's I currently do this with an Expect script that uses SSH. I was just wondering if 3.1(1...

Member Since	‎04-30-2001 10:30 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	28

User Statistics

User Activity

5k-5k vPC config sync

FEX numbering

How many Nexus 2148T to 5020

NAT overload pool size

FWSM and security levels

Re: FEX numbering

Re: FEX numbering

Re: WiSM and CatOs

Re: FWSM and security levels

Re: Getting ARP via SNMP on FWSM context