wanwa01
Level 1
Level 1
Member since ‎05-04-2009
‎01-22-2024

User Statistics

  • 24 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Hi guys,Need your help on below situation.I would like to configure the netflow on the FTD. FMC is running on 6.4. I created new flexconfig object and defined the destination.  Created new flexconfig policy and assign the firewall accordingly. These ...
  Hi guys the plan is to upgrade nexus sup1 from 6.2.8 to 6.2.16. i have run the install command as per below and it looks i can do direct upgrade. The result is good there is no incompatibility issue Compatibility check is done:Module  bootable     ...
Hi Guys, need your advice. We have installed the MPA A9K-MPA-8X10GE to the line card and try multiple commands but failed to bring that up. However if we we reset the line card and it works. We understand as per spec this card is supporting OIR. The ...
Hi guys,i woulld to perform IOS upgrade on ASR1002RP1 to ver adventerprisek9.03.09.02.S.153-2.S2. I will also upgrade on rommon but just like to confirm if anyone can help on:1. do i need to perform by babystep upgrade (current version is adventerpri...
hi,we detecting crc error on nexus 5k interface but the number of crc is not incrementing that high. We have replaced the media type or SFP.filber cable also been replace but still getting crc error. Our nexus 5k is running on 5.1.3.N1.1 and has FEX ...
Community Statistics
Member Since ‎05-04-2009 06:32 PM
Date Last Visited ‎01-22-2024 05:39 PM
Posts 24