Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm doing a configuration of a:UC540W-FXO-K9 10 phone SPA301-G1 The problem is that I can not enter the brackets on the CCW does not give me the option, I need to be SharedSupport Apparently these are the part number required for each component CON-S...
I'm doing a configuration of a:UC540W-FXO-K9 10 phone SPA301-G1 The problem is that I can not enter the brackets on the CCW does not give me the option, I need to be SharedSupport Apparently these are the part number required for each component CON-S...
Hi everyoneAnyone know what the technical features that should have the audio file is to upload (uplaload) to function as a UC560 autoattended? All I've seen on the Script Management using the CCA is that the file must be of type. AEFSomeone told me ...
The client has a UC520-32U-8FXO-K9 with license upgrade: uc500-48u-upgrade. The client needs to know how many Softphone licenses should be purchased counting they are associated with existing extensions. We are requiring about 5 softphone licenses fo...
The client has a UC520-32U-8FXO-K9 with license upgrade: uc500-48u-upgrade. The client needs to know how many Softphone licenses should be purchased counting they are associated with existing extensions. We are requiring about 5 softphone licenses fo...
Hi Miguel De SantiagoMy name is Johnnatan Rodriguez, your information about the vlan's is correct, now I'm goint to explain to you, why does the router need subinterfaces? Subinterfaces: we need it when we have more vlans than physical linksAs you sa...
Hi David Kabal My name is Johnnatan Rodriguez, you don't have to buy a new modem, you can configure ipv6 6rd in your RV042 v3, here is the link where you can find the GUI configurationhttp://www.cisco.com/en/US/docs/routers/csbr/app_notes/RV0xx-RV220...
Good afternoon KESHAV METHI This type of switch is modular, so you can add ports (modules), Here I leave a web page where you can see the product specifications and see which links supports.http://www.cisco.com/en/US/prod/collateral/switches/ps571...
hi Ran BendoriYou don't have to install the SDM in your router, you have to install it in your pc, then run the programThanks for using our forumGreetings,Johnnatan Rodriguez Miranda.
Good morning Ran Bendori thanks for using our forumIn order to enable SDM, follow this steps in the router configuration.1. Assign an IP address to the router: ip address x.x.x.x y.y.y.y 2. Create a username: ( username privileg...
