FYI to anyone else that has had this issue, we had it on one particular stack, but not others running the same code. Also, we found that the hang occured for us during telnet sessions only, but not SSH.
Hi all,I'm trying to use SNMP to graph the Rx and Tx power current measurements that you get when you issue the "show interface ethernet x/yy transceiver details" command on a Nexus 5548, but I'm not having much luck tracking that down the correct OI...
I'm looking for the OID string on a IE-3000 switch to give me the results for the optical Tx and Rx power as shown in the "show interface transceiver" command (this is the output i ran directely from the IE-3000 switch, BTW): ...
I was researching this issue myself, and I found that one of our 2960G switches had a difference on it that the others didn't, and that was I had an IP SLA configured on it. Monitoring the I/O memory showed a constant decline to a point where you co...
I tried that, but i couldn't find what I was looking for, as I don't know the ojbect name. What makes it hard is that the MIB file that I found this in the for 6509 doesn't seem to be supported by the IE-3000 series switch.I thought there may be mor...
Hi,Do you have a Port Channel interface setup?Take a look at the following link example.http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094647.shtml#configs
