On Tuesday, December 16, 2014 at 10:00 a.m. Pacific Standard Time, join Cisco expert, Ankur Bajaj for a live webcast on Introduction to Cisco Trustsec Solution and Configuration.With lot of end points coming to the network and different access method...
IntroductionIn this blog my aim is to discuss deployment of DMVPN with vrf and BGP ( iBGP and eBGP ) as the tunneling protocol and EIRGP running on the control plane ( core ) on a different vrf. The intend is to make direct spoke to spoke communicati...
This is a video from the live webcast on Network Admission Control (NAC) Deployment with Cisco Support Engineer and CCIE Ankur Bajaj. This webcast provides an overview of NAC deployments and explains Inband, virtual Gateway, and L2 configurations. It...
IntroductionNetwork Admission ControlRelated Information Introduction Ankur Bajaj is a senior customer support engineer working with the security team at the Cisco TAC in Bangalore, will present and reply to questions about Network Admission Control...
Hello Gustavo,If your CAM is running version 4.7.2 then go to Device Management > Clean Access > Clean Access Agent > DistributionAnd check Windows NAC agent version and logically in this case it should be 4.7.2If this is the case then see to it that...
Hello,Is split tunneling enabled on the head end or is it tunnel all.If in case split tunneling is enabled then can you try with tunnel all with a new profile and see if that makes a difference ( this is on the ASA part ).From the client perspective,...
Looks to me that the database is corrupted and to clean the database follow these:-1. Please take a backup from the Appliance.2. 2. Install the ACS 4.2.1.15 on Windows 2k3 machine.3. 3. Restore the backup taken from the appliance on...
