I've been working with the CCA to configure a SIP trunk with a SIP provider on a UC520. The provider wants us to use SIP over TCP, but the CCA only seems to want to configure SIP over UDP. I've reconfigured the dial peers directly to accomodate SIP...
Wanted to provide some feedback on what I am seeing with CCA 2.2.1 and UC520 16 user:I'm running into some consistency issues when configuring monitoring and intercom extensions using the Configure tab, Voice section, User Extensions tab. If I go th...
In reading the information in regards to the new CCA 2.2 release, I noticed the following information:• Phone VPN Setup Wizard: Use the Phone VPN Setup Wizard to enable and configure SSL VPN client settings on SPA 525G IP phones. SPA525G phones confi...
I've got a PIX 515 v7.2.1 configured as just a firewall (no nat). We are experiencing issues with FTP outbound. We can connect to one FTP site without issues (doesn't matter which, just the first one we connect to). When we attempt to connect to o...
I am trying to use the PIX strictly as a firewall (no NAT). However, when I attempt to add an inside ip address to ethernet 1 (for example 12.x.x.65 255.255.255.192) it errors out with "Interface inside ip address or netmask not valid". I've got th...
By default, TCP is enabled under sip-ua, along with UDP and SIP TLS. The default for SIP in dial-peers though appears to be UDP. After I adjusted the dial-peers to TCP and everything worked, I left it there. I did go back later though and disable...
There is RCC integration from UC520 to Microsoft UC today, and UC520 integration to Microsoft Exchange 2010 UM works quite well also.http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecti.htmlJust a note, you can...
Any updates on this? I've got customers thinking their UC500 series may be hitting the chopping block because of the apparent lack of updates. One has requested quotes on moving to a different platform altogether (Microsoft).
