Hi all,We're planning buy 6 set of Cisco 2960-X with stacking with existing two firewall with HA function (please see attached diagram), if firewall 01 down will auto failover to firewall 02, is this network design good ?Please some expert give us su...

Hello all,I'm trying to setup etherchannel between two layer2 swtich in Cisco Packet Tacker, two switch fa0/1 and fa0/2 for etherchannel with trunk (mode on), and fa0/3 connected PC with access vlan 10.But show etherchannel port both ports is down, c...

Hello all,Please see attached file first.We have two existing Cisco 3650G with root/secondary bridge for resilience, now we want to add two Cisco 2960X with stack and for two server resilience with LACP, is it possible to do that ?Thanks

Hello,Our existing network are using two 3560G 24 ports layer3 and nine 2960 layer2 switchs, they are created trunk between layer3 and layer2 with spanning tree, now the two 3560G no more ports to use, so want to buy new 3750 layer3 switch. My questi...

Hello,I'm testing them on GNS3, please take a look on attached GNS3 file first.You can see this network havng two Frame-Relay switch, but I'm only testing FR2 for Redistribute static subnets into OSPF, so FR1 is no use right now.R4 and R6 has HSRP, t...