Yes, this issue is observed with IOS XE Everest 16.6.4 and ASA 9.8(2)33.
Sure enough "ip ospf lls disable" on the router side brought the OSPF adjacency up.
Issue is not observed with IOS XE Denali 16.3.6 - i.e. the lls workaround is not required. ...
Hi. I've set up the ACS to forward via syslog to CW, and manually added ACS as an unknown device in RME.In RME, I tried to set up automated syslog action to send ACS syslog messages via email, but RME doesn't seem to want to action upon.All the other...
Hi,I'm trying to authenticate Webvpn users via their client certificate which i generate for them, and local AAA authentication stored on the ASA.I followed the instructions on the ASA guide to enable this - trustpoints correctly set up, https certif...
Hi,I have a VPN Concentrator 3030, with 3 interfaces.To be able to do things like NAT or IPSEC LAN-to-LAN, an interface needs to be marked as 'public' on the interface configuration (configuration -> interfaces -> Ethernet)In cisco's documentation, i...
Our organisation uses the PPTP variant of remote access VPN (via a Microsoft 2000 server). Our remote users are given cisco 827, 837 and most recently 877 routers for their remote access into the network via the Internet.What we've noticed is that PP...
Does that mean i'll have to get another syslog product (possibly Kiwi Syslog) to do the job?? Considering CW is a high end product, I would've thought it should be flexible enough to support the ACS syslog.Thanks for the answer anyway.
I, too am waiting for support for Vista on secure desktop for the concentrator.If you have the ASA, you can get secure desktop 3.2 which supports Vista in a limited way, i.e. doesn't run a secure desktop session inside Vista, but only able to check t...
Hi, may I know what IOS version of your 828 that fixes the issue? I've tried many many versions on my 877 and still doesn't work. Config is similar to yours. Keen to try out the version that works on yours.
I've been having this problem for ages right from ios version 12.3 to 12.4 (latest).The problem is seen in 837 and 877, both of which i've configured.Not sure whether the cisco folks are looking into this long-standing problem.
