About icehckyplyr22

icehckyplyr22 · 08-28-2020

I am trying to setup an Isolated Private VLAN and running into some issue mixing the enterprise & SMB environments. I have a few switch ports I want to configure to talk to the internet only and not allow the devices connected to these ports to talk ...

icehckyplyr22 · 06-04-2019

I am wondering if someone can help me out as I am having a heck of a time grasping how to get this setup on this Cisco SG350 switch. I have 2 VLANs 130 & 150 that I would like to segment any type of Layer 2 traffic on each VLAN, one will be part of a...

icehckyplyr22 · 03-08-2015

I have 2 x SG500 52 port switches in a stack in my networking equipment room. This room is where all of my PC's plug into along with my internet connection & firewall equipment. My server equipment is in another part of the building with a 24 port SG...

icehckyplyr22 · 02-22-2015

I have a couple of questions regarding the use of the voice VLAN & autosmart ports. I was running into some issues getting this to work %100 in my environment. Here is my network in a nutshell,Single SG300 52 port switch, ports 1-47 are configured Un...

icehckyplyr22 · 04-10-2014

I continue to bang my head against the wall on this one. Everytime I try to connect to the AnyConnect SSL VPN I get the following error"No address available for SVC connection"I have verified up and down that my VPN pool is there and assigned. I have...

icehckyplyr22 · 08-29-2020

This could work but I have multiple switches in which these devices connect, from what I read this only works for ports on the same switch.

icehckyplyr22 · 03-11-2020

I am having this issue where I just had to power cycle the whole 4 switch stack. Just randomly in the middle of business hours :) I am running Firmware Version (Active Image):2.5.0.92 2147415954 2020-Mar-11 09:54:13 Emergency %AUTOSMARTPORT-F-DEV_CA...

icehckyplyr22 · 06-05-2019

Here is my issue, I am trying to stop client A from talking to client B. I have Guest Isolation enabled on my UniFi AP’s and it works BUT only when two clients are on the same AP. If I have a client’s connected to two different APs they can talk to e...

icehckyplyr22 · 03-08-2015

Thats what I ended up doing, I was curious if that would be the best method and it sounds like it. Thanks!

icehckyplyr22 · 04-11-2014

I just deleted my Group Policy and added the DHCP pool to the default one and the issue was resolved. Thanks for the info, I think you are right on point!

Member Since	‎10-29-2007 07:09 PM
Date Last Visited	‎08-30-2020 10:48 AM
Posts	19
Total Helpful Votes Received	5

User Statistics

User Activity

Private VLAN between 2 switch stacks

Private VLAN - Cisco SG350

Best setup with 3 switches (2 in a stack)

SG300 & AutoSmart ports for VLAN

AnyConnect issue with Cisco ASA 5505

Re: Private VLAN between 2 switch stacks

Re: CSCvq71611 - FATAL ERROR Reporting Task BRMN - Issues with LLDP-MED

Re: Private VLAN - Cisco SG350

Thats what I ended up doing,

I just deleted my Group