About uwbitservices

uwbitservices · 06-06-2016

I know it is best practice to dual-home all devices in a VSS setup but what if we don't want to do this with all our devices? All our Cisco distribution switches will be dual homed to the VSS pair when we perform an upgrade in a couple of weeks. Cur...

uwbitservices · 05-31-2016

We are replacing our mixed seven device L3 Core with two 6800's in VSS. I'm currently learning to configure VSS but I'm not sure if I need to do anything specific on both 6800 switches before enabling VSS, there seems little information on this. For ...

uwbitservices · 01-20-2016

We are upgrading our University Network. We want two 6807 switches in VSS on the Core. All our sites and main buildings on the Campus will have 4500-X switches in distribution/head of cabinet dual linked at layer 2 to each 6800 Chassis at 10Gig (so 2...

uwbitservices · 11-19-2015

We have a WS-C3650-48TQ currently running IOS-XE version 03.03.04SE. Switch Ports Model SW Version SW Image Mode ------ ----- ----- ---------- ---------- ---- * 1 52 WS-C3650-48T...

uwbitservices · 06-09-2016

All connected, configured and working well. Thank you.

uwbitservices · 06-08-2016

After thinking about this further I agree with you. Although I do have some concerns about this kind of design. If one of the Force10's goes down, won't half the end-users traffic potentially go over the VSL links?

uwbitservices · 06-06-2016

Hi, glad you got it to work too.

uwbitservices · 06-01-2016

Thank you. I'll give that a try and check out your links. The kit arrived late last Friday and we have it all unpacked and powered on in a lab setup but not connected to each other yet but we will do that this week and work on the config. I'll let yo...

uwbitservices · 11-20-2015

Thanks for replying, looks like the software install command doesn't quite work over tftp.

Member Since	‎11-13-2007 01:20 AM
Date Last Visited	‎04-08-2020 12:57 AM
Posts	11

User Statistics

User Activity

Non-dual homed devices in a Cisco VSS

Preparing two 6800 switches for VSS

Dual 6800 switches in VSS. What interface speeds should we use for the VSS?

3650 IOS-XE software update failing

All connected, configured and

After thinking about this

Hi, glad you got it to work

Thank you. I'll give that a

Thanks for replying, looks