About crusier2015

crusier2015 · 01-12-2023

Could you plz help me in this situation ?Suppose that one inbound external call came from SIP trunk and one extension pickup this call , and try transfer this call to another internal extension didnt work, when this extension that is trying transfer ...

crusier2015 · 12-15-2022

Hi,When inbound call came from Sip trunk and the extension 201 answer the call and try transfer to another extension never works.Could you help me?Follow show run attached.Detail , i dont know why but aparently when user press button transfer and di...

crusier2015 · 11-09-2022

Hi ,I´ve implemented with success the follow translation and outbound calls are working , but ISP have as mandatory that always i sent prefix(115555) for all outbound calls, this prefix appears on displau phone of users. For example if user call to...

SIP-PROFILE - Outbound Call to ISP-SIP · 02-15-2022

Hi, I´m tring configure the sip-profile on dial-peer to make outbound calls work, if the call flow CUCM->CUBE->ISP SIP dont work, but if i connect the WAN link from ISP directly from my notebook using a softphone ( Microsip for example) the call work...

crusier2015 · 06-05-2020

Hi, I´m planning implement private vlan for all switches on network, 15 switches on all network ( there are 15 floors separetd by vlan 1-15). The purpose is block the hosts communicate each other on same network. I dont have ISE to implemment the bes...

crusier2015 · 11-28-2022

Hi Roger,Sorry for delay, i was changed the some infos for privacity of custommer reasons, but I made a mistake and disturbed your analysis, sorry for this faultThe good notice is after your recommendation to use voice class e164-pattern-map and one ...

crusier2015 · 11-09-2022

Hi Roger,Tks for you support, follow debug voip ccapi inout attached( sorry debug ccsip was not possible to attached, follow bellow the debug ccsip).I tried the follow translation rule, but the outbound return busy signal:voice translation-rule 1 ru...

crusier2015 · 11-09-2022

a correction, if i apply only the follow, now on display only appears number 0:sip-uano remote-party-id

crusier2015 · 11-09-2022

Hi Roger, tks for both sugestions, unfortunately didn't worked, still appearing number on phone display.

crusier2015 · 03-04-2022

Tks friends! Roger you are correct, tks!!

Member Since	‎01-11-2015 07:29 AM
Date Last Visited	‎01-19-2023 01:37 PM
Posts	93
Total Helpful Votes Received	35

User Statistics

User Activity

Problem to Transfer Calls

Problem to transfer inbound call from Sip Trunk

Help - Hide Prefix Translated on Display Phone

SIP-PROFILE - Outbound Call to ISP-SIP

Protecting access layer using private vlan

Re: Help - Hide Prefix Translated on Display Phone

Re: Help - Hide Prefix Translated on Display Phone

Re: Help - Hide Prefix Translated on Display Phone

Re: Help - Hide Prefix Translated on Display Phone

Re: SIP-PROFILE - Outbound Call to ISP-SIP