About sakkarinengineer

sakkarinengineer · 01-27-2016

Hi, I found problem about redirect web on ASR1002 . I want to pppoe client redirect web ( lock billing ). Now if client can access web via ip address ,such as 8.8.8.8 it working . but if access via domain name (google.com) not working. My Configurat...

sakkarinengineer · 01-12-2015

Hi .I have been attempting to migrate services from an existing Cisco 3825 to a recently purchased ASR1002 . Configure ;Router#sh runBuilding configuration...Current configuration : 2307 bytes!! Last configuration change at 10:33:33 UTC Mon Jan 12 20...

sakkarinengineer · 02-02-2016

Hi. Now I can't use domain name redirect. I think policy-map don't apply with redirect group. Tell me my mistake Please. redirect server-group REDIRECT_NOPAY server ip 203.146.56.141 port 80 class-map type traffic match-any RDR_CLASS match access-gro...

sakkarinengineer · 01-28-2016

Hi The following is output from the show redirect translations command . redirect when use IP address only. Test_Bras#sh redirect translations Source IP/port Destination IP/port Server IP/port Prot 192.168.1.33 49166 203.146.237.21 80 203.146.56.1...

sakkarinengineer · 01-28-2016

Hi, Now I configured command Cisco-AVpair += ip:l4redirect=redirect to group WIFI-PORTAL on radius and traffic class service however can't redirect web portal via domain name . My configured (radius+ISG) is correct right?

sakkarinengineer · 01-28-2016

Thank you Mr.Manuel Rodriguez I want to know about command "Cisco-AVpair += ip:l4redirect=redirect to group WIFI-PORTAL" on Radius Server . It correct, Right?. and Where to applies policy-map ? I found problem ACL not active.

Member Since	‎01-12-2015 02:53 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	6

User Statistics

User Activity

Redirect Web Portal On BRAS ASR 1002

Migrate BRAS Cisco 3825 To ASR1002.

Hi.

Hi

Hi,

Thank you Mr.Manuel Rodriguez