Tim,That is the ccorrect configuration for the attendant phone. However, the rerouting calling search space is likely not configured on your inbound sip trunk to call manager. Let us know if this helps.

This problem is usually because WebEx uses the E.164 dialing scheme and most CUCM clusters aren't configured to handle this number format. As a quick test, do the following:Set significant digits to 10 in the sip trunk from MeetingPlace to CUCM. You ...

Hey Andy,Your problem is definitely caused by the TSP connection failure. There's a few things that you will want to check to troubleshoot this one.-Make sure the APP server is synced with NTP. Time synchronization is one of the most common causes of...

If you are on MPE 2.1.1.2 and not 1.2, this is a known defect. The defect ID is CSCtl75166 for your reference. If you open a TAC case, we can publish hotfix 41 to you which will resolve the issue. Either way though, MPE is already end of software mai...

Ahmed,It's hard to tell the root cause to a problem such as this from the description alone. If the problem is reproducable, i would suggest pulling an information capture for the problem and opening a TAC case for analysis. To pull an infocap:Log in...