Hi,1.) We have a WLC and NCS. I think I can add it to either but I just cannot figure it out.>> We can only add the APs to WLC. NCS is to monitor/manage WLCs and APs.2.) how do I add them into the WLC to be available to my users?>> See if the doc at ...

Hi Vlad,I would create my SSIDs with there number starting greater than 16 to fix this. Any SSID which has index higher than 16 doesn't go into default group and hence any new AP which join the WLC will not broadcast that SSID. HTH. Thanks & Regards,...

Hi Manish, This link will help :http://www.cisco.com/c/en/us/td/docs/wireless/ncs/1-0/configuration/guide/NCS10cg/tasks.html#wp1182229 Thanks & Regards,Ishant**** Pls rate all useful responses. Each time you rate a response Cisco will donate $1 to Ki...

Hi, This needs some troubleshooting. I would do the following : 1.) Check if the user need to re-auth if the user is active or if it is idle for 20 minutes.2.) If this happens when it is idle then check user idle timeout under controller >> General >...