About g8104

g8104 · 04-05-2017

Hi, we have a datacenter with FabricPath implementation (Border Leaf, Spine-layer and Access-layer). Each access-layer-switch is connected to each of our four Spine-switches (fully meshed). Now, as the datacenter is reaching it maximum capacity, we...

g8104 · 05-31-2016

Hi all, I have a question regarding the cabling-possibilities for connecting a Nexus 2000 to a parent-Nexus 6000. My uplinks of the Nexus 2000 are 40-Gig-connections. I now want to use a MPO breakout cable to "split" this to 4x 10-Gig-connections. ...

g8104 · 03-16-2015

Hi all, we've got a problem on our CAT6509 VSS-pair. The CPU-load is quite high(sometimes about 100%), so we decided to upgrade to Supervisor VS-S2T-10G-XL.The CAT6509 are running in VSS-mode and are the distribution of our virtualization serverfarm....

g8104 · 09-23-2013

Hi all,I´ve got a problem with a new line-card I´d like to install in our Nexus 7010.Informations around the N7k:Installed SW (system/kickstart) NXOS 6.1(1).3x 6kw power.Line-Card should be installed in Slot 8. There´s already a F-card (N7K-F248XP-25...

g8104 · 03-17-2015

Ja, good questions:1.) What do you mean with "fabric mode"?The switches running in redundancy mode sso. And the "fabric state" on both sites is "Active". Control plane state on one site is "active" on the other its "standby. Did that answer your ques...

g8104 · 09-24-2013

Thanks for that information...will update the SW.

Member Since	‎11-29-2007 02:11 AM
Date Last Visited	‎05-14-2018 06:05 AM
Posts	6

User Statistics

User Activity

FabricPath - Spine extension ???

How to connect Nexus 2000 with MPO breakout cable

Catalyst 6509 VSS - Replace SUP720 to SUP2T

N7K-F248XP-25E not accepted

Ja, good questions:1.) What

N7K-F248XP-25E not accepted